鋁合金板1.4313是馬氏體級，耐的的腐蝕不銹鋼高朝，熱治理后耐久度性好。X3CrNiMo13-4鋼的設備設備性是是由于電化學完分中鉬和鎳的高分子量。這合金類調用劑受限制了增高級碳分子量的還要——給定滲透壓等于于奧氏體鋁合金板。或許鎳分子量不太高，但鎳分子量約為4%，重要增加了鋼對各項的的腐蝕不銹鋼氛圍的承受力——多次設備設備性。X3CrNiMo13-4鋼大家可制造的敢達300℃在工作任務溫度下工作任務的零元器件及運轉情況和零元器件及運轉情況，、爆出在各項的的腐蝕不銹鋼氛圍中的零元器件及運轉情況，互相保護足以的表面層水平括抗氯化物特點)。QT650.QT780和QT900水平下，熱治理后通常交房工字鋼。半機器設備用做自然能源制造的.化工機械.在石油化工和自然新能源行業中，鍋輪機爆出在高無刺激超高溫下.泵.進行制冷機元器件。鋼不適感合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50提供EN1.4313馬氏體不銹鋼材質的有退火工藝屬性（+A）情況下、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，必須哪兩個需要跟業務量說明白哦。